Cetop 3 / NG06 Pneumatic Piloted valves, Double pneumatic operated control - 2 Position Detent, AD3P20DZ002
The Aron directional control valves NG6 are designed for subplate mounting with an interface in accordance with UNI ISO 4401 - 03 - 02 - 0 -94 standard (ex CETOP R 35 H 4,2-4-03), and can be used in all fields on account of their high flow rate and pressure capacities combined with compact overall dimensions.
The use of solenoids with wet armatures allows a very practical, safe construction completely dispensing with dynamic seals; the solenoid tube is screwed directly onto the valve chest whilst the coil is kept in position by means of a lock nut.
The special, precise construction of the ports and the improvement of the spools enables relatively high flow rates to be accomodated with a minimal pressure drop (Δp).
The centre position is obtained by means of calibrated length springs which reposition the spool in the centre or end of travel position once the action of the impulse is over.
The valves are designed for use with DIN 51524 standard hydraulic mineral oils and it is recommended that filters should be fitted to ensure a maximum contamination level of class 10 in accordance with NAS 1638, ß25≥75.
Click here for technical information (pdf)